Knee brace medi PT control wrap - Soft brace for patella tracking control - Soft brace for stabilisation of the patella
medi PT control is a patellar luxation brace. The product is exclusively to be used for the orthotic fitting of the knee and only on intact skin.
- Secure fit due to physioglide hinge
- Proprioceptive effect due to precisley compression
- High comfort due to medi Airtex+
Product benefits
Postoperative:
Reliable relief of injured or operative treated sturctures
Conservative:
Correction of lateral Patella mal-tracking
Collateral stabilization
Extension and flexion limitation protects against damaging joint movements and relieves injured structures
Limitations:
Extension: 0°, 10°, 20°, 30°, 45°
Flexion: 0°, 10°, 20°, 30°, 45°, 60°, 75°, 90°
Immobilisation: 0°, 10°, 20°, 30°, 45°
Also available as wrap version. Excellent compliance due to wrap-around version with velcro closing to the front.
Donning/fitting instructions
Wrap version:
Open all the straps so that they will not interfere with you putting on the brace.
Now put your leg into a 30-degree angle flexion position and pull the brace up over your leg.
Make sure that the kneecap is positioned centrally in the space for the patella. Position the brace so that the middles of the hinges are level with the upper border of the kneecap and just behind the lateral centre line of the leg.
Now close the straps in the following order:
Lower calf strap in the back.
Lower thigh strap in the back.
Patellar straps so that the kneecap is guided from the outside to the inside. Please ensure that the patellar air cushion is positioned to the side of the kneecap and that it does not push onto the kneecap from the front.
Upper thigh strap in the back.
Thigh strap in the front.
Calf strap in the front.
If possible, walk a few steps in order to check that the brace is in the correct position. Please adjust the position as required.
Sleeve version:
Open all the straps so that they will not interfere with you putting on the brace.
Now put your leg into a 30-degree angle flexion position and pull the brace up over your leg. Make sure that the kneecap is positioned centrally in the space for the patella. Position the brace so that the middles of the hinges are level with the upper border of the kneecap and just behind the lateral centre line of the leg.
Now close the straps in the following order:
Lower calf strap in the back
Lower thigh strap in the back
Patellar straps so that the kneecap is guided from the outside to the inside
Please ensure that the patellar air cushion is positioned to the side of the kneecap and that it does not push onto the kneecap from the front.
Upper thigh strap in the back
Thigh strap in the front
Calf strap in the front
If possible, walk a few steps in order to check that the brace is in the correct position. Please adjust the position as required.
Wearing directions
Only change the extension and flexion limits on instruction from your doctor or orthotist. In order to prevent hyper extension, always insert extension wedges or 0° wedges. The wedges define the exact excursion of the orthosis. In difficult soft-tissue conditions, e.g. where the soft-tissues are under compression, it may be necessary to insert the larger wedge to limit the joint movement to the desired excursion. In addition, make sure that the orthosis hinges are correctly positioned: the middles of the hinges should be level with the upper border of the patella. The hinge must lie behind the midline of the leg.
Indications
- Conservative or postoperative treated patellaluxation with mild knee instability
- Patello femoral pain syndrome
- Patella instabilities
- Lateral malalignement with mild knee instability
- Retropatella cartilage surgey
- After lateral release surgery
Product safety information
Manufacturer information:
medi GmbH & Co. KG
Medicusstraße 1
Bayern
Bayreuth, Deutschland, 95448
info@medi.de
https://www.medi.de
There are no reviews yet.
